| |
MANUAL INFLATION |
| |
|
 |
MANUAL INFLATION:
Grasp the top or side of the velcro attached inflation pocket and tear
the pocket down and off. This action will trigger the CO2 gas
cylinder inflating your PFD instantly giving you buoyancy to PFD
Type 1 standard. Replace the used CO2 cylinder at your earliest
opportunity. If you need advice as to how to do this or where to
obtain a cylinder please contact Stormy Australia.
ORAL INFLATION:
It is sufficient to use oral inflation should you find yourself in
a hazardous (but not an emergency) situation. Pull down the
inflation pocket about halfway and take out the red oral inflation
tube located next to the gas cylinder. Inflate by mouth.
IMPORTANT:
Do not trigger the CO2 Cylinder if you have inflated your Stormy
orally. This may damage the inflation chamber.
TO DEFLATE:
Invert the black inflation cap and press the raised top of
the cap into the oral inflation tube. This will open the one-way valve.
AFTER ACTIVATION:
When the trigger mechanism has been activated (ie. the jacket has been
inflated) it is necessary to replace the CO2 cylinder and the green
indicator tab. Remove the old cylinder by unscrewing anticlockwise and replace.
|
| |
|
Go up
|
| |
|
